Publicité
Les langues disponibles
Les langues disponibles
2
4
1. Insert the tubes into the fabric and
connect the tubes with the middle
plastic connector.
Then connect four side tubes with the
corner plastic connector.
1
4
2
3. Insert the stand tube into the fabric,
and connect with the plastic connector.
04
1
4
2
2. The fully assembled bottom is as
shown.
3
4. Install top rail tubes of four sides
and connect with the plastic
connector. (Note that the side with
zipper should be assembled at the last
step.)
WARNING:
1) Regularly check whether the fastening elements of each parts are firm.
2) Never leave your child unattended, always keep an eye on your child.
3) After assembly, make sure that the playpen is securely assembled and
that all parts are locked in place.
4) Do not disassemble the playpen when the baby is in the playpen.
6
5) Do not allow your baby to climb out of the playpen.
6) Do not use the playpen without the mattress (not included).
7) Do not leave anything in the playpen that could lead to suffocation or
strangulation.
8) Please be aware of the danger of open fire and other sources of
intense heat, such as electric heaters, gas stoves, etc.
9) If the assembly or disassembly is not easy, check the playpen carefully
and follow the description to avoid damage.
10) This product can be used for newborns and up until your child is
around three years of age.
CLEANING & MAINTENANCE:
1) Only use household soap or detergent with warm water.
2) Use lukewarm water for washing, then drain and dry thoroughly. DO
NOT BLEACH!
3) Do not store or use the playpen in places with extremely high or
extremely low temperatures or high humidity and always ensure sufficient
ventilation.
4) Hand wash only.
05
Publicité
