Publicité
Les langues disponibles
Les langues disponibles
6.2.3. Control of charging in Override mode
The charging events can be controlled by a dry contact module. The figure below shows an example how you
can build up the override control of charging with a timer, switch, relay or similar.
When the dry contact is closed, the charging station gets power and can charge the connected vehicle. When
the dry contact is open, the charging station does not get power and charging is not possible.
Power supply
Switchboard
Timer / Switch /
Main fuse
Relay
L1 / L2 / L3
LERAK131B_20221004
NC
EVC
EV Charging Station
EV
39 / 68
Publicité
