Publicité
Les langues disponibles
Les langues disponibles
m
aIntenance
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service.
Wear gloves to protect hands from sharp edges and hot surfaces.
Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take
your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF
or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your Echo dealer for
repairs.
sKIll level
Level 1 =
Easy to do.Common tools may be required.
Level 2 =
Moderate difficulty. Some specialized tools may be required.
ECHO offers REPOWER
maIntenance Intervals
COMPONENT/SYSTEM
Air Filter
Inspect/Clean
Choke Shutter
Inspect/Clean
Fuel Filter
Inspect/Replace
Fuel Cap Gasket
Inspect/Replace
Fuel System
Inspect/Replace
Spark Plug
Inspect/Clean/Replace
Cooling System
Inspect/Clean
Muffler Spark Arrestor
Inspect/Clean/Replace
Cylinder Exhaust Port
Inspect/Clean/Decarbon
Drive Shaft
Inspect/Grease
Gear Housing
Grease
Recoil Starter Rope
Inspect/Clean
Screws/Nuts/Bolts
Inspect/Tighten/Replace
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the
frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
(1) Apply POWER BLENDX
(2) Apply POWER BLENDX
(3) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.
* All recommendations to replace are based on the finding of damage or wear during inspection.
Maintenance Kits and Parts to make your maintenance job easier.
TM
MAINTENANCE
PROCEDURE
TM
every 25 hours of use.
TM
every 50 hours of use.
O
SKILL
DAILY OR
LEVEL
BEFORE
REFUEL
REQ'D
USE
1
I / C *
1
I / C
1
1
1
I (3)
1
2
I / C
2
2
2
2
1
I / C *
1
I *
G
T
rass
rimmer
'
m
peraTOr
s
anual
3 MONTHS
EVERY
YEARLY 600
OR 90
HOURS
R*
I *
I *
I (3)
I / C / R *
I / C / R *
I / C
I (1)
I (2)
15
HOURS
I / R *
Publicité
