Publicité
Les langues disponibles
Les langues disponibles
Stop and read this!
UNPACKING AND TESTING FIREPLACE
Carefully remove the unit from the box. Prior to installing the unit, test to make sure the unit operates prop-
erly. To do this, plug the unit's power supply cord into a conveniently located 120-Volt grounded outlet.
Stop and read this!
GROUNDING INSTRUCTIONS
This insert is for use on 120 Volts. The cord has a plug as shown in (A) of Figure 2 given below. An adapter
as shown in (C) is available for connecting three-blade grounding-type plugs to two-slot receptacles. The
green grounding lug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is avail-
able.
To disconnect heater, turn controls to o , then remove the plug from outlet.
GROUNDING PIN
Page 8
(A)
NOT ALLOWED
IN CANADA
METAL SCREW
COVER OF GROUNDED
OUTLET BOX
ADAPTER
GROUNDING
(C)
MEANS
(B)
Figure 2
Grounding Methods
Publicité
