Publicité
Les langues disponibles
Les langues disponibles
Stop and read this!
INSTALLATION CHECKLIST
> Power supply service must be completed prior to nishing to avoid recontruction.
> Heater vents and air openings cannot be covered in any circumstances.
Stop and read this!
OPERATING INSTRUCTIONS
Once the unit has been properly connected to a grounded electrical outlet, it is ready to operate.
Note: Ensure the house circuit breakers for the power supply are turned on.
Main Power Switch:
The Main Power Switch is located on the bottom of the unit. Figure 4 illustrated the location of the
switch. The "|" indicated ON and the "O" indicated OFF. Push the switch to "|" to turn on the unit and
ame e ect. The red LED indicator will be turned on.
Page 12
Power (on/o )
Figure 4
Main Power Switch
Publicité
