Paramount DD5 Manuel Du Propriétaire page 14

STORAGE INSTRUCTIONS
WARNING: Ensure the power cord is not installed so that it is pinched or against a sharp edge and
ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of re
electric shock or injury to persons.
Construction and electrical outlet wiring must comply with local building codes and other applicable
regulations to reduce the risk of re, electrical shock and injury to persons.
Do not attempt to wire your own new outlets or circuts. To reduce the risk of re, electric shock or injury
to persons, always use a licenced electrician.
CLEANING INSTRUCTIONS
GLASS CLEANING:
The glass is cleaned in the factory during assembly operation. During the shipment, installation, han-
dling, etc., the glass may collect dust particles, these can be removed by dusting lightly with a clean dry
cloth.
To remove ngerprints or other marks, the glass can be cleaned with a damp cloth. To prevent scratch-
ing, do not use abrasive cleaners or spray liquids on the glass surface.
FIREPLACE SURFACE CLEANING:
Use a cloth dampened with warm water only to clean painted surfaces of the electric replace. Do not
use abrasive cleaners.
Page 14