Ecler NXA Serie Mode D'emploi page 20

SOFTWARE
EclerNet Software - Realtime full GUI of all functions and controls thru Ethernet
Operating System: Windows®: XP Prof. (SP3); Vista (SP1); W7(SP1), W8, W10
Minimum EclerNet System Requirements: Pentium IV ® 2GHz
with interactive graphical display
- Grouping mode channels or devices
- Automated report generation
- Remote power on with programmable delay.
- Up to 256 devices on same net.
- Autodiscovery devices feature
- Routing capability through NAT gateways.
- Real time metering at input/output (DSP)
- Device "Finder" feature
- Save & Recall setup and preset functions
- Firmware update capability thru Ethernet
- Password protection
- Default Network configuration:
IP: 192.168.0.100
Mask: 255.255.255.0
Gate: 192.168.0.1
UDP Port: 2210
and W11.
500MB RAM
100MB HDD free space
1024x768 pixels & 16bits colour display
10/100/1000 Ethernet Network card
20