RIKA GSM INTERNO Instructions De Montage Et D'utilisation page 23

1. GENERAL INFORMATION
Note:
Before carrying out any work, the stove must be switched off and allowed to cool down.
Only undertake the work described below when the plug of the stove is removed from the socket.
Important:
We would like to point out that RIKA pellet stoves and the INDUO stove only operate with the CINTERION BGS2RT-RS232 GSM modem and
CINTERION MC52i GSM modem. In addition, ensure that incoming messages are not stored on the modem, but on the SIM-card inserted by you.
You must deactivate the PIN query for the SIM-card used before inserting it into the GSM.
You can do this yourself by simply inserting it into your mobile phone. More detailed instructions for deactivation of the PIN query can be found in
the operating instructions of your mobile phone
2. SCOPE OF DELIVERY
BGS2RT-RS232
GSM Modem SMA
for all GSM networks
Mains Plug 230VAC/ 12VDC 2 Pin
including adapter plug for wiring
harness, required for power
supply
Note
In addition you also need a standard prepaid SIM-card properly for the stove. Attention: Not included in delivery!
The GSM network provider must be a usual one in the location of the stove.
Stored messages will be deleted if the SIM card is used by the stove.
3. PREPARATIONS
Open the decorative glass door.
Disconnect the power plug from the mains.
Close the decorative glass door and remove the two retaining screws.
Pull the stove out of the wall.
All manuals and user guides at all-guides.com
Mounting material:
B15839
B15840
1 x L01131 assembly plate
2 x N112129 slotted cheese head screws M3 x 20
2 x N111984 screws M4, washers and nuts
#2
#5
SMA Antenne Vimcom
screwed directly into
B15841
modem
Connection cable,
connects the modem
to the mainboard and
to the optional wireless
B17573
roomsensor
|23
22