osann REX Mode D'emploi page 21

Installation
- 17 -
EN
All manuals and user guides at all-guides.com
1.1 Checking the shoulder strap height
Always check that the shoulder straps are at the correct height for your child. The child's shoulder
straps should always be threaded through the slots in the cover and seat shell that are closest to
the top of your child's shoulders.
1.1.1 Adjusting the shoulder strap height and headrest height
Step 1: At the back of the child seat, pull the harness connector out from the
shoulder strap as shown on the left; then remove the two shoulder
straps from the harness connector on the back of the child seat.
Step 2: As shown in the picture, pull the adjusting ring to adjust the headrest up and down,
and hold it in the correct position (red line), so that the lower edge of child's chin is at the same
height as the lower edge of the headrest.