Publicité
Les langues disponibles
Les langues disponibles
3
Use
1. Plug in the power cord (8) to a suitable mains
supply outlet.
2. Press on the on/off button (1).
You may use suction control to
C
adjust the suction power during
operation. The more you open the
control, the more the suction power
shall be decreased.
Suction
adjustment
slider
3. Press on the on/off button (1) to turn off the
appliance.
Press cord winding button (2) to rewind the
4.
power cord.
3.4 Use of parquet/carpet brush
There is an adjusting mechanism on the left side
of the brush with an indicator for carpet and hard
surfaces.
Adjustment
Mechanism
8 / 57 EN
All manuals and user guides at all-guides.com
C
C
o n / o f f
button
C
3.5 Accessories
1. You can directly attach the required accessory
2. Accessories can also be attached to the end
on/off button
3.6 Parking the vacuum cleaner
A hook is available on the floor brush to park the
vacuum cleaner. It is possible to hang the floor
brush to the relevant park position with this hook.
You can adjust the brush to a
suitable position to the surface to
be vacuumed with the adjusting
mechanism.
Use your brush at normal position
(hair brushes concealed) to clean
carpets and rugs.
To clean hard floors such as parquet,
vinyl or linoleum, change the position
of adjustment mechanism and clean
with hair brushes.
to the handle firstly by removing the telescopic
tube (15).
of the telescopic extension tube (15) to reach
further points. Remove the floor head and
attach the desired accessories.
Narrow crevice tool: It is used
for narrow places, corners and
cracks
Furniture Brush: It is used for
carpets, flooring, stairs, etc.
Vacuum cleaner / User manual
Publicité
