Bebeconfort Fero Mode D'emploi page 19

Your child in the Bébé Confort Fero/FeroFix
1. Never leave your child unattended.
2. Always secure your child with the seat belt.
3. Ensure that the car seat belt lies as low as possible under the
stomach, to properly support the pelvis.
4. Make sure the headrest is adjusted to the proper height.
5. Before every use, make sure the car seat belt is not damaged or
twisted.
6. Remove all objects from the child's coat and trouser pockets so
they cannot get stuck between the child and the car seat belt. Such
objects could cause injury in case of an accident.
7. Tell your child not to play with the seat belt buckle and to keep its
head against the headrest.
WARNING : Never adjust the recline position of the Bébé
Confort Fero / FeroFix whilst your child is in it.
Fastening the Bébé Confort FeroFix with the ISOFIX-connectors
using the ISOFIX system from the vehicle.
ISOFIX-connectors have been developed to ensure secure and easy
fastening of the child systems in the car. Not all cars have an ISOFIX
child restraint system. Please consult the car manufacturer's handbook.
Consult the attached list of cars in which it has been checked that the
seat can be installed correctly. Future updates of this list can be
checked on the website www.bebeconfort.com.
Bébé Confort Fero/FeroFix in the car
1. Use the Bébé Confort Fero/FeroFix only on a front-facing seat that
is fitted with an automatic or static 3-point belt that has been
approved according to the ECE R16 standard or similar. Do NOT
use a 2-point belt.
2. Make sure the car seat can be installed properly in your car before
purchasing it.
3. Always fully install the Bébé Confort Fero/FeroFix with the car seat
belt, even if there is no child in it.
4. Deactivate the airbag if using the Bébé Confort Fero on the front
passenger seat. If this is not possible, place the passenger seat in
the rearmost position.
5. Remove the car seat headrest if it stops you from adjusting the
headrest of the Bébé Confort Fero/FeroFix to the desired height.
6. Make sure to replace the headrest of the back seat of your vehicle
when you remove the car seat Bébé Confort Fero/FeroFix.
7. The Bébé Confort Fero/FeroFix back support cannot be removed to
ensure optimum safety.
8. Make sure that fold-down rear seats are locked into position and
that the back rest of the car seat is upright position.
9. Prevent the Bébé Confort Fero/FeroFix from becoming trapped or
weighed down by luggage, seats and/or slamming doors.
10. Make sure all luggage and other loose objects are secured.
11. Always cover the Bébé Confort Fero/FeroFix when exposed to direct
sunlight in the car, otherwise, the cover may discolour and plastic
parts may become too hot for your child's skin.
19
EN