Télécharger Imprimer la page

Yakima HoldUp Plus2 Instructions D'installation page 4

Masquer les pouces Voir aussi pour HoldUp Plus2:

Publicité

Les langues disponibles

Les langues disponibles

prepare for loadIng.
release wheelstrap
by pressing the lever
on the buckle.
swIng pIvot arm Into place.
rotate the pivot arm
up until the hook
rests on the bike tire
1" from the brakes.
secure rear wheel straps.
1033534A-4/18
All manuals and user guides at all-guides.com
Tuck strap into slot at
rear of whelltray.
Feed the strap through
the spokes of wheel.
Rotate the wheel
slightly, if necessary.
load heavIest BIKe fIrst.
Always load your
bikes with the heaviest
closest to the vehicle,
and the lightest farthest
from the vehicle.
CAUTIon:
If any part of your bike
comes in contact with
the red trigger, do not
use this carrier with
that bike.
tIghten rear wheel straps.
• Insert the strap end
through the top of the
ratchet buckle.
• Be sure the pad rests
on the rim.
Move the ratchet tab up and
down to tighten the strap.
Make sure your
tires are filled to
recommended
pressure found
on the tire.
secure the hooK.
Compress the
hook against
the wheel by
applying firm
pressure.

Publicité

loading