Haier HCC3320AES Instructions D'installation page 5

CUTOUT
A
WIDTH
22 5/8" 19-1/4"
(57.4 cm) (49.0 cm)
24" (60 cm)
22 13/16" 19-9/16"
(58.0 cm) (49.7 cm)
28-11/16" 19-1/4"
(72.9 cm) (49.0 cm)
30" (76.2cm)
28 15/16" 19-9/16"
(73.5 cm) (49.7 cm)
34-1/16" 19-1/4"
(86.5 cm) (49.0 cm)
36" (91.4 cm)
34-5/16" 19-9/16"
(87.2 cm) (49.7 cm)
IMPORTANT
Under the cooktop it is necessary to install a
partition as shown in figure 2-3.
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8"diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
All manuals and user guides at all-guides.com
B C
24"
(60 cm) min
18" (45.7 cm)
min Height from
30" countertop to
(76.2 cm) min nearest cabinet
on either side
of unit
36"
(91.4 cm) min
* NOTE
24" (61 cm) min. clearance if bottom of wood or metal cabinets is protected
by not less than 1/4" (0.6 cm) flame retardant millboard covered with no less
than No. 28 MSG sheet steel 0.015" (0.04 cm) stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020" (0.05cm) copper. 30"(76.2 cm) min.
clearance between top of cooking platform and bottom of unprotected
wood or metal cabinet
D E
30" (76.2 cm)
min.(see note*) 2" (5 cm) min
Clearance from Clearance from
cutout to side
countertop to
unprotected wall on the left
and right of the
overhead
surface unit
This cooktop has been designed with wide
tolerances of cut-out to cover possible
replacement with other brands. We recommend
to that you consider the minimum dimension of
cut-out size In the case of new Installation.
Some cut out sizes for possible replacements:
Dim . Inches
• 24" 22 13/16" x 19-9/16"
• 30" 28-15/16" x 19-9/16"
• 36" 34-5/16" x 19-9/16"
Installation Manual
ENGLISH
F G
13" (33 cm)
Depth of
unprotected
overhead
cabinets
cm
58.0 x 49.7
73.5 x 49.7
87.2 x 49.7
5