Waldmann SPOT LED 003 MCXFL 3 S Mode D'emploi page 23

GB Instructions For Use Machine Light MC(X,T,B)FL 3 S „SPOT LED 003"
Connection
CAUTION
Damage caused by wrong mains
voltage!
A wrong mains voltage can result in
damaging or destroying the light.
Operate units of protec-
¾
tion class III with safety
extra low voltage (SELV) only!
Connection only by a skilled
¾
electrician!
¾ Before putting the light into
operation, the user has to check
whether the supply voltage is
identical with the rated voltage
specified on the rating plate.
¾ For connection to the sup-
ply voltage use the terminal
connector provided with the
luminaire.
All wiring termination shall be
¾
in accordance with the National
Electric Code
Note
The light is protected against po-
larity reversal. The function is also
guaranteed when the two lines are
interchanged.
Light with connecting cable
The light is supplied with free
strand ends for connection to
safety extra low voltage (SELV).
For connection to the supply volt-
age use the terminal connector
provided with the light.
For lights with accompanying
terminal strip, the outlet must cor-
respond to the protection type of
the light and be adequately dimen-
sioned for the terminal strip.
Note for USA
This device must be connected to
a class 2 power supply!
23