Dirt Devil INFINITY BLACK LABEL MC54 Mode D'emploi page 16

3 Maintenance and care
3.2 Cleaning/replacing the exhaust filter
41
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see
accessories' for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
release mechanism (fig. 45) and do not release it until the exhaust filter
cover is in its final position.
3.3 Spare parts and accessories
You can order accessories and spare parts in various ways:
CAUTION:
Only use original spare parts from the scope of delivery or those which
you have purchased by reordering.
Page 54, 'International Service'
16
42 43
Chapter 3.3, 'Spare parts and
44
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Release the exhaust filter cover as shown (fig. 41).
4. Remove the exhaust filter using the tab provided (fig. 42).
5. Tap out the exhaust filter over a dustbin.
6. Then brush out the exhaust filter with a soft brush, e.g. the furniture
brush included in the scope of delivery (fig. 43).
7. Push the exhaust filter back into its console,
so that the tab audibly clicks into place (fig. 44).
8. Attach the exhaust filter cover at the bottom first.
9. Lock the exhaust filter cover (fig. 45).
The following accessories and spare parts can be reordered:
Item number
5254001
Filter set consisting of:
1 motor protection filter (fig. 34)
1 exhaust filter (fig. 43)
M203-5
1 parquet brush
M219
1 mini-turbo brush "Fellino"
M221
1 midi-turbo brush
M232
1 long flexible crevice nozzle
M234
1 large upholstery nozzle
M236-1
1 hard floor nozzle
click!
45
Content