Safety precautions
WARNING
•
Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being
played with by young children, creating the potential risk of suffocation.
Fitting work and connection equipment expansion should never be done by any other than a qualified
installation specialist.
•
Incorrect fitting may cause equipment to fall, resulting in injury.
Do not use any television and displays other than those given in the catalogue.
•
Otherwise the unit may be dropped and become damaged, and personal injury may result.
Do not fit at any locations subject to humidity, dust, smoke, steam or heat.
•
This may have an adverse effect on the display and cause fire or electric shock.
Install the mounting screws and power cable in such a way that they will not make contact with the inside
parts of the wall.
•
Electric shocks may result from contact with any metal objects inside the wall.
Do not modify the Cover-frame kit.
•
Doing so may cause the unit to fall out and become damaged, which may result in personal injury.
CAUTION
For installation, use the special-purpose constituent parts.
•
Otherwise, the display may fall off the wall, possibly causing injury.
Be careful not to have your fingers pinched during installation work.
•
It can cause injuries.
Keep the unit away from direct sunlight and heating equipment.
•
Failure to do so may result in warping, deformation, or degradation of materials, and a loss of strength that may cause the
equipment to break and cause injury.
During assembly and setup work, make sure that all screws are securely tightened.
•
If assembly is not performed correctly, the stand will not be able to support the weight of the display. This may result in the
display falling over and becoming damaged, which may result in personal injury.
Dispose of the product when it is no longer going to be used.
•
Otherwise the unit may fall over and become damaged, and personal injury may result.
Requests regarding handling
1) Exercise care when selecting the location for the display because it may discolor or deform due to light or heat if it is placed
where it is exposed to direct sunlight, or near a heater.
2) Clean the cover frame-kit by wiping it with a soft, dry cloth (such as cotton or fl annel). If the bracket is very dirty, remove
the dirt using a neutral detergent diluted in water, and then wipe it clean with a dry cloth. Do not use benzene, thinner, or
furniture wax as this may cause the coating to peel.
(For information on cleaning the display unit, see the display unit's instruction manual. If using a chemically-treated cloth,
follow the instructions supplied with the cloth.)
3) Do not affix adhesive tape or stickers to the product. Doing so may dirty the surface of the cover frame-kit. Do not allow
long-term contact with rubber, vinyl products or the like. (Doing so will cause deterioration.)
4) Take care during installation as shocks can cause 'panel cracks' to the display unit.
Caution:
This bracket is intended for only Panasonic display models.
Use with other apparatus is capable of resulting in instability causing possible injury.
PROFESSIONAL INSTALLATION IS REQUIRED.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT HANDLING.
3