Hilti TE 700-AVR Mode D'emploi page 18

▶ After transporting, always check all visible parts and controls for signs of
damage and make sure that they all function correctly.
Storage
▶ Always store this product with the electric supply cable unplugged from
the electricity supply.
▶ Store this product in a dry place, where it cannot be accessed by children
or unauthorized persons.
▶ After a long period of storage, always check all visible parts and controls
for signs of damage and make sure that they all function correctly.
9 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
9.1 Troubleshooting
Trouble or fault
The breaker doesn't
start.
12 English
Possible cause
Electronics initialization
in progress (takes up to
4 seconds after plugging
in).
The electronic restart
interlock is activated
after an interruption in
the electric supply.
Interruption in the elec-
tric supply.
The generator is in sleep
mode.
The tool is faulty or ser-
vicing is due.
Action to be taken
▶ Switch the power tool
off and then on again.
▶ Switch the power tool
off and then on again.
▶ Plug in another electric
tool or appliance
and check whether it
works.
▶ Apply a load to
the generator by
connecting a second
power consumer (e.g.
worklight). Switch the
tool off and then on
again.
▶ Have the product
repaired only by Hilti
Service.
428076
*428076*