Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a
service center prior to continuing use.
WARNING
Problem
Vacuum won't run
Dust escaping from
vacuum
Vacuum tools won't
pick-up
12
All manuals and user guides at all-guides.com
TO REDUCE THE RISK OF PERSONAL INJURY–UNPLUG BEFORE CLEANING OR SERVICING.
Possible Cause
1. Power cord not firmly
plugged into outlet.
2. No voltage in wall plug.
3. Blown fuse or tripped
breaker.
4. Thermal Protector
activated.
1. Dust Bag is full.
2. Dust Bag is not installed
correctly.
3. Hose not installed correctly.
4. Rinsable Exhaust Filter not
installed completely.
1. Hose clogged.
2. Dust bag is full.
3. Rinsable Exhaust Filter is
clogged.
Possible Solution
1. Plug unit in firmly.
2. Check fuse or breaker in home.
3. Replace fuse/reset breaker in home.
4. Unplug and allow vacuum to cool for 30min. (This willl
reset the thermal protector)
1. Replace dust bag.
2. Review Dust Bag removal & replacement.
3. Review Hose installation.
4. Review Rinsable Exhaust Filter Removal and Cleaning.
1. Remove hose and tools; remove obstruction.
2. Replace dust bag.
3. Remove rinsable exhaust filter and clean.
Publicité
