Publicité
Les langues disponibles
Les langues disponibles
PRODUCT FEATURES
It is important to know your vacuum cleaner parts and what accessories you will be using with your unit. As you unpack the cleaner, check to
see that the parts shown on this page are with the product and review these parts before using. If any parts are missing, call your local Aerus®
location for replacement.
1.
Carry handle
2.
ON/OFF toe switch
3.
Thumb latch for bag change
4.
Hose release tab
5.
Hose receptacle
6.
Side bumper
7.
Automatic cordwinder
8.
Control dial
9.
Power nozzle with Headlight
10. Power hose and handle
(10b) Power nozzle/ accessory switch
11. Wands
12. Crevice tool
13. Accessory adapter
14. Sidekick® II
15. Combination dusting/
upholstery tool
16. Vacuum filter bag
17. Afterfilter
18. Deluxe floor tool
ASSEMBLY
CAUTION:
Turn the cleaner off before connecting or disconnecting wands, power nozzle and hose.
TO CONNECT HOSE HANDGRIP (A) TO THE WANDS (C):
• Align electrical connections on the wand with sockets on hose handgrip, and insert until
latch clicks.
• To remove, press latch (B) and pull wand out.
TO ASSEMBLE WANDS (C) AND POWER NOZZLE (D):
• Align electrical connections on the wand with sockets on power nozzle and insert
until latch clicks.
• To remove, press latch (B) and pull wand.
TO ATTACH POWER NOZZLE (D):
• Slide end of wand into elbow (E) on nozzle.
• To remove, press release button and pull wand out.
NOTE:
Periodically wipe clean the ends of the hose hand grip (A), wands (C), and the
elbow (E). This action will maintain peak performance, ease of assembly
and satisfaction.
TO ATTACH THE POWER HOSE TO THE VACUUM:
• Align arrows on hose (F) with those on the suction end of cleaner. Insert hose until it clicks.
To remove, press release tab (G) and pull hose out.
4
All manuals and user guides at all-guides.com
11
12
8
1
2
7
6
10
10b
19
16
15
14
13
A
B
C
C
E
D
3
4
5
18
17
G
F
Publicité
