Truma Multivent TBM Mode D'emploi page 5

Truma Multivent – Two-stage 12 V universal fan
Operating instructions
Short Description
The Truma fan Multivent TBM is designed for the air distri-
bution on the heater Trumatic S 2200 (fig. A), as a vapour
escape or as a ventilator in the kitchen or in the bath room
(fig. B) or to increase the air output in existing warm air
distribution systems with extremly long ducting.
a = off
b = position 1/2
c = position 1
Operation
Switch to the desired power level (b or c) on the control panel.
Switching off
Switch off at the control panel (a).
Multivent
b
a
c
Technical data
(determined in accordance with EN 624 or Truma test
conditions)
Operational voltage
DC voltage 12 V
Current consumption
0.23 A in position 1/2
0.5 A in position 1
Air output
29 m³/h in position 1/2
60 m³/h in position 1
EC Type Approval
e1 03 2603
5