Publicité
Les langues disponibles
Les langues disponibles
Daily Checklist and Storing for your NEUTON Mower
To help maintain your NEUTON Mower for optimum performance, we recommend you follow this checklist each time you
use your machine. Also, follow the checklist for storing the machine .
Do not insert the Safety Key until you have completed all of the daily checks and you have moved the Mower to the area
that you are going to mow.
[ ] BATTERY: Make sure the Battery has a full charge.
[ ] INSPECT: Before inserting the Safety Key, check under the Mower Deck and make sure that the Blade is attached
securely. Inspect for any visible damage to the Blade or Deck. Inspect the Mower Blade and clean it to
remove any debris (such as grass or twigs) that might be clinging to the Blade from its last use. For the best
performance and longest life of the Blade, it is best to clean the Blade of any clinging debris after each use.
Always follow the safety precautions when cleaning the Blade.
Make sure all Knobs, Bolts, Attachments, Guards, and Covers are in place and securely attached.
Make sure the Control Bar is clean and operating smoothly. See page 16.
Make sure the Motor shuts off when you release the Control Bar.
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Mower down immediately. Remove
the Safety Key and, following all safety procedures, inspect the Mower Blade and underside of the Mower for
any obstructions.
If you cannot find the cause of the problem or are uncertain what to do, then have the Mower inspected by a
qualified repair shop before using it, or visit our website at www.neutonpower.com.
[ ] MOWING: If you are uncertain whether the grass you want to cut is too long or thick for optimal cutting, raise the Blade
Height and mow the yard in multiple passes, cutting it slightly shorter each time. It is best to mow more
frequently, rather than let the grass become excessively long.
Push the Mower (before starting it) to the lawn area that you wish to mow.
NOTE: The length of time that a Battery can hold a charge while mowing depends upon lawn conditions; tall or
thick grass makes the Mower work harder causing the Battery to discharge faster.
Storing
[ ] Always store the Mower with a full Battery charge.
[ ] Always store the Mower in a dry environment where the temperature is between 40ºF (5ºC) and +95ºF (+35ºC). Make
sure the storage temperature will never be outside these limits. For long-term storage, store the Battery in an
environment where the temperature is lower, since the Battery self-discharges slower at lower temperatures.
[ ] Do not store the Mower near chemicals, such as fertilizers, organic or other solvents. These products are often highly
corrosive and may cause permanent damage to your Mower.
[ ] Always keep the Safety Key in a safe place away from children.
[ ] You can safely keep the Battery in the Mower when storing for the long term. If you must store the Battery outside the
Mower, see the TIPS on page 14. During long-term storage of Batteries that are intended for reuse, periodically
recharge the Battery, as recommended in "Chapter 4: Charging and Caring for the Battery".
Copyrights and Trademarks
©2009 Neuton Inc.
NEUTON and NEUTON logo are trademarks of Neuton Inc.
All rights reserved.
Documentation
Produced in Taiwan R.O.C. exclusively for Neuton Inc. and meets CPSC Blade Safety requirements.
Neuton Inc.
7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
www.neutonpower.com
All manuals and user guides at all-guides.com
©2009 Neuton Inc. 256291
Publicité
