All manuals and user guides at all-guides.com
Cost save mode – Each contact can be assigned to specific SIM in
•
Contacts. When call is made to contact assigned to available SIM, the
SIM is used for the call even if other SIM is active.
Mobile data – Checkmark to enable data access over the mobile
•
network.
SIM card to use – You can change the default data network. All
•
mobile packet services (Web, MMS, Email, etc) will use SIM selected
on this value. When only one SIM card is inserted, the default data
network is set as the inserted SIM and it is not allowed to change.
Data roaming – Checkmark to allow you to use mobile data
•
connections when you're roaming outside your home network area.
Wi-Fi
You can use high-speed Internet access while within the coverage of the
wireless access point (AP).
On the Settings screen, tap Networks tab > Wi-Fi.
1
Tap
to turn Wi-Fi on and start scanning for available Wi-Fi
networks.
2
Tap a network to connect to it.
If the network is secured with a lock icon, you will need to enter a
•
security key or password.
The status bar displays icons that indicate Wi-Fi status.
•
NOTE
If you are out of the Wi-Fi zone or have set Wi-Fi to Off, the device may
•
automatically connect to the Web using data, which may incur data charges.
Wi-Fi Direct
Wi-Fi direct provides a direct connection between Wi-Fi enabled devices
without requiring an access point.
Tap
> Advanced Wi-Fi > Wi-Fi Direct.
•
NOTE
When in this menu, your device is visible to other visible Wi-Fi direct devices
•
nearby.
Settings
62