Martin Logan OUTDOOR LIVING Serie Mode D'emploi page 4

OVERVIEW
MartinLogan Outdoor Living Series
Satellite Speakers
The MartinLogan Outdoor Living Series satellite speakers are
premium sounding all-season outdoor speakers .
OUTDOOR SAT 40 and OUTDOOR SAT 60 are sold
individually and can be ordered in accordance with the area
to be covered .
Made of durable UV treated ABS plastic, MartinLogan Outdoor
Living Series speakers can endure the elements while providing
years of trouble free service .
While installation is relatively easy, MartinLogan's Outdoor
Living Series products are designed to be installed by your
authorized MartinLogan dealer .
OUTDOOR
40 SAT
WARNING!
• ACCOUNT FOR POTENTIAL ELECTRICAL,
GAS, BURIED CABLES, PLUMBING OR
OTHER OBSTACLES BEFORE INSTALLING
GROUND STAKES.
• MANY LOCALITIES FORBID DIGGING
WITHOUT PRIOR NOTIFICATION.
CONTACT LOCAL AUTHORITIES
BEFORE INSTALLATION.
• READ AND FOLLOW all instructions
before beginning installation.
3
All manuals and user guides at all-guides.com
OUTDOOR
60 SAT
IMPORTANT! CONTENTS OF
OUTDOOR SAT 40 AND OUTDOOR
SAT 60 SATELLITE SPEAKERS DO NOT
CONTAIN MOUNTING OPTIONS. THESE
MUST BE PURCHASED SEPARATELY:
Contents of OUTDOOR SAT 40 and OUTDOOR SAT 60:
• (1) Speaker with Mounting Arm
• (1) Off-Season Speaker Cover
• (2) Silicone-Filled Wire Connectors
Mounting Options (Sold Separately):
• Ground Stake • Surface Mount Bracket
• Inground Conduit Box
Required Tools:
• Shovel • Cable Strippers
• Phillips Screwdriver • Wrench
Power
• Crown CDi 1000 Amplifier or dealer recommended amp
The MartinLogan OUTDOOR SAT 40 and OUTDOOR SAT 60
are passive speakers . These speakers are optimized for use with
the Crown CDi 1000 amplifier which can be programmed
with customized DSP settings for a variety of different speaker/
subwoofer installation scenarios . See 'Audio Settings Chart' on
page 15.
8 ohm amplifiers can also be used with the MartinLogan
Outdoor Living system, however, they will not be able to run the
proprietary MartinLogan DSP presets available for the Crown
Amplifier . If you use the speakers and subwoofer with an 8 ohm
amplifier, we recommend the following . Satellite Speakers:
Wire only one speaker per amplifier channel and set the tap
on each speaker to the 8 ohm setting . Note: Do not wire
more than one satellite per amplifier channel in 8 ohm mode .
Subwoofer: Wire one subwoofer per amplifier channel .