Martin Logan OUTDOOR LIVING Serie Mode D'emploi page 12

WIRING & SPEAKER INSTALLATION (CONT'D)
Speaker & Burial Cable Connections
C o m b i n e a n d
twist (clockwise)
t h e r e d w i r e s
(as shown in the
d i a g r a m ) f r o m
the amp, speaker
and to the next
speaker . Secure
these three wires
using the provided
silicone-filled wire
connectors; Repeat procedure for Black wires . NOTE: You
may have to cut some of the speaker cable emanating from
the speaker to a more manageable size .
SPEAKER DIRECTION & SETTINGS
1. Aim the speaker by loosening the screw in the speaker
arm and retightening once the desired aim is achieved .
2. Set the dial on every satellite speaker
in your sytem. To access the dial, remove the
rear cap from your satellite speaker by turning a
quarter turn in a counter clockwise direction . Now
pull the cap away from the satellite enclosure .
Set the dial to correspond with the number of
satellite speakers and subwoofers in the installation
(see 'Audio Settings Chart' on page 15) .
7.5W
11
All manuals and user guides at all-guides.com
To Adjoining
To Amp
Speaker
3.75W