Logitech ViewPort AV 100 Manuel D'installation page 5

2 2
Setting Up the Camera
1. Turn on the computer.
2. Install the software that came with your product. Make sure to follow all on-screen instructions.
3. Mount camera on base.
• Insert camera cable through opening in camera base.
• Align screws on camera back with only one set of slots on
camera base. There are three sets of slots to choose from.
• Press camera onto base and pull down to secure camera.
4. Insert AC power cord into end of camera cable.
5. Plug camera cable into USB port on computer.
6. Plug AC adapter into AC outlet.
4
2
English
USB
5
3
6