i.safe MOBILE IS740.2 Manuel De Demarrage Rapide page 6

All manuals and user guides at all-guides.com
FAULTS AND DAMAGES FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it If there is any reason to suspect that the safety of the device has been compromised, it
must be withdrawn from use and removed from any ex-hazardous areas immediately. must be withdrawn from use and removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device. Measures must be taken to prevent any accidental restarting of the device.
The safety of the device may be compromised, if, for example: The safety of the device may be compromised, if, for example:
Malfunctions occur. Malfunctions occur.
The housing of the device shows damage. The housing of the device shows damage. The housing of the device shows damage.
The device has been subjected to excessive loads. The device has been subjected to excessive loads. The device has been subjected to excessive loads.
The device has been stored improperly. The device has been stored improperly. The device has been stored improperly.
Markings or labels on the device are illegible. Markings or labels on the device are illegible. Markings or labels on the device are illegible.
We recommend that a device displaying errors or in which an error is suspected be We recommend that a device displaying errors or in which an error is suspected be
sent back to i.safe MOBILE GmbH to be checked. sent back to i.safe MOBILE GmbH to be checked.
EX-RELEVANT SAFETY REGULATIONS EX-RELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety Use of this device assumes that the operator observes the conventional safety
regulations and has read and understood manual, safety instructions and certifi cate. regulations and has read and understood manual, safety instructions and certifi cate.
The following safety regulations must also be complied with: The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed. Inside ex-hazardous areas the covers of all interfaces must be closed.
To ensure the IP protection, it has to be ensured that all gaskets are present and To ensure the IP protection, it has to be ensured that all gaskets are present and
functional. There must be no large gap between the two halves of the housing. functional. There must be no large gap between the two halves of the housing.
The device may only be charged outside ex-hazardous areas. The device may only be charged outside ex-hazardous areas.
The device may only be charged at ambient temperatures between 5°C ... 35°C. The device may only be charged at ambient temperatures between 5°C ... 35°C.
The device may not be exposed to any aggressive acids or alkalis. The device may not be exposed to any aggressive acids or alkalis.
The device must not be taken into zones 0/20 or 1/21. The device must not be taken into zones 0/20 or 1/21.
Only accessories approved by i.safe MOBILE GmbH may be used. Only accessories approved by i.safe MOBILE GmbH may be used.
The device must be shut down completely during use in potentially explosive areas. The device must be shut down completely during use in potentially explosive areas.
The battery is fi x installed and not user serviceable. The battery is fi x installed and not user serviceable.
In case the device has a hand strap, it is not allowed to do the adjustment of the hand In case the device has a hand strap, it is not allowed to do the adjustment of the hand In case the device has a hand strap, it is not allowed to do the adjustment of the hand In case the device has a hand strap, it is not allowed to do the adjustment of the hand
strap in ex-hazardous areas. strap in ex-hazardous areas.
FURTHER SAFETY ADVISES FURTHER SAFETY ADVISES
Do not touch the screen of the device with sharp objects. Dust particles and nails may Do not touch the screen of the device with sharp objects. Dust particles and nails may Do not touch the screen of the device with sharp objects. Dust particles and nails may
scratch the screen. Please maintain the screen clean. Remove dust on the screen with scratch the screen. Please maintain the screen clean. Remove dust on the screen with scratch the screen. Please maintain the screen clean. Remove dust on the screen with scratch the screen. Please maintain the screen clean. Remove dust on the screen with
a soft cloth gently, and do not scratch the screen. a soft cloth gently, and do not scratch the screen.
Charge the device under indoor conditions only. Charge the device under indoor conditions only. Charge the device under indoor conditions only.
Do not put the device in environments with excessive temperatures, as this could lead Do not put the device in environments with excessive temperatures, as this could lead Do not put the device in environments with excessive temperatures, as this could lead Do not put the device in environments with excessive temperatures, as this could lead
to heating of the battery, resulting in fi re or explosion. to heating of the battery, resulting in fi re or explosion.
Do not charge the device near any fl ammable or explosive substances. Do not charge the device near any fl ammable or explosive substances. Do not charge the device near any fl ammable or explosive substances.
Do not charge the device in environments with much dust or humidity. Do not charge the device in environments with much dust or humidity. Do not charge the device in environments with much dust or humidity.
The device may only be charged at ambient temperatures between +5°C ... 35°C. The device may only be charged at ambient temperatures between +5°C ... 35°C. The device may only be charged at ambient temperatures between +5°C ... 35°C.
EN EN 5 5