Samsung HW-H450 Mode D'emploi page 18

FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all without wires!
+ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the BT mode.
•
You will see BT READY on the front display of
the Soundbar.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth
device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
•
You will see a list of scanned devices.
4. Select "[Samsung] Soundbar" from the list.
•
When the Soundbar is connected to the
Bluetooth device, it will display [Bluetooth
Device Name]  BT on the front display.
•
The device name can only be displayed in
English. An underline " _ " will be displayed if the
name is not in English.
•
If the Bluetooth device has failed to pair with the
Soundbar, delete the previous "[Samsung]
Soundbar" found by the Bluetooth device and
have it search for the Soundbar again.
5. Play music on the connected device.
•
You can listen to the music playing on the
connected Bluetooth device over the Soundbar.
•
In BT mode, the Play/Pause/Next/Prev functions
are not available. However, these functions are
available in Bluetooth devices supporting AVRCP.
Bluetooth device
● Depending on its manufacturing
specifications, the (
changed into the (
functionally works just the same.
● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired at a
time.
● The Bluetooth connection will be terminated
when you turn the Soundbar off.
● The Soundbar may not perform Bluetooth
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the Soundbar.
- If several Bluetooth devices are
simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
● The Soundbar supports SBC data (44.1kHz,
48kHz).
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● You cannot connect the Soundbar to a
Bluetooth device that supports only the HF
(Hands Free) function.
● Once paired the device,on D.IN/AUX/HDMI/
USB/ARC mode, select "[Samsung]
Soundbar" from the list will automatically
change to BT mode.
18
Connect
) button may be
) button which