Samsung HW-H450 Mode D'emploi page 17

FUNCTIONS
INPUT MODE
Press the ( ) button on the main unit's top panel or the
mode you want.
Input mode
Optical Digital input
AUX input
HDMI input
BLUETOOTH mode
TV SoundConnect
USB mode
● Depending on its manufacturing
specifications, the (
changed into the (
functionally works just the same.
ARC (HDMI OUT)
ARC (Audio Return Channel) transfers digital audio signal to the HDMI OUT (ARC) port.
1. Connect the TV supporting ARC to the Soundbar with an HDMI cable.
2. Turn on the TV, and turn on the Soundbar's Anynet+.
3. Press the ( ) button on the main unit's top panel or the
the D.IN mode.
● Depending on its manufacturing specifications, the (
which functionally works just the same.
● If the HDMI cable does not support ARC feature, ARC may not work properly.
● To turn off the ARC function, turn Anynet+ off.
Display
D.IN
AUX
HDMI
BT
TV
USB
) button may be
) button which
HDMI Cable
17
(SOURCE) button on the remote control to select the
The unit turns off automatically in the following situations:
● D.IN/HDMI/BT/TV/USB/ARC Mode
- If there is no audio signal for 25 minutes.
● AUX Mode
- If the AUX cable is disconnected for 25 minutes.
- If there is no KEY input for 8 hours when the AUX
cable is connected.
- To turn the Auto Power Down function
ON or OFF, press and hold the & button for 5
seconds. AUTO POWER DOWN ON / OFF
appears on the display.
(SOURCE) button on the remote control to select
) button may be changed into the (
FUNCTIONS
) button