Publicité
Les langues disponibles
Les langues disponibles
Step #1: Remove the Doors
Remove the top door:
1. Loosen the set screw in the bullit cap with a
key and remove the bullit cap from the hinge pin by
sliding off. There are 4 bullit caps to remove altogether,
1 at the top hinge, 2 at the center hinge, and 1 at the
bottom hinge. Remove all 4 and set aside parts for later
reassembly.
2. Loosen
⁄
" Hex Nut underneath the top hinge with a
5
16
open end wrench, unscrew completely from the hinge
pin. See Figure 24.
3. Make sure the door is supported, and remove the hinge
pin from the cabinet hinge with a flat bladed screw-
driver.
4. Carefully lift the door off the center hinge.
Support
door before
removing
hinge-
Figure 23
WARNING
!
EXCESSIVE WEIGHT HAZARD
Use two or more people to move product.
Failure to do so can result in back or other injury.
All manuals and user guides at all-guides.com
CUSTOM GRILLE FACIA AND DOOR PANELS
⁄
" hex
3
32
Top hinge
pin-
⁄
"
1
2
Door
hinge-
Bullit cap-
Figure 24
Set screw-
18
-Cabinet
hinge
-
⁄
Hex
5
16
nut
-Set screw
#10 screws
in side of
cabinet-
Figure 25
-Bullit cap
-Door
hinge
-Cabinet
hinge
Figure 26
-Center
hinge
Publicité
