Publicité
Les langues disponibles
Les langues disponibles
English
Driver Installation
1.
Switch on your computer.
2.
Connect the adapter to an available USB port of your computer.
3.
A virtual disk will be found, start the driver installation by double clicking on
the contained file.
4.
Follow the instructions of the driver installation.
5.
The driver will now be installed.
6.
Click on "Finish".
7.
Your computer will ask to reboot. Click "Yes" to restart the computer.
8.
After restart you can start using the device immediately.
9.
Now connect a cable to the adapter and your monitor.
10. Afterwards you can change the graphics settings.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2023
-3-
Publicité
