Publicité
•
Bank Select LSB (CC 32)
Controller transmitted in combination of Program
Change and Bank Select MSB in order to select a
specific bank of sound. It can be transmitted using
the PRG IN COMBIN. function and when stored in the
combinations and Tutti.
Data format: BnH 20H vvH
n=channel number
vv=bank LSB number
•
Sustain (CC 64)
Message which controls the Sustain effect.
Data format: BnH 40H vvH
n=channel number
vv=switch
•
All Sounds Off (CC 120)
Terminates all voices currently on for the specific
channel.
Data format: BnH 78H 00H
n=channel number
•
Reset All Controllers (CC 121)
Controllers are set to the default value.
Data format: BnH 79H 00H
n=channel number
-
This message is transmitted only.
•
All Notes Off (CC 123)
Terminates all notes currently on for the specific
channel.
Data format: BnH 7BH 00H
n=channel number
Program Change
Messages for selecting sounds, timbres or programs
in external modules. It also can be received by the
organ to recall combinations, Tutti and Crescendo
steps.
Data format: CnH mmH
Transmitted:
n=channel number
mm=Program Ch. number:00H–7FH (0–127)
Received:
n=channel number
mm=Program Ch. number:
01H-0AH (1-10): general combinations 0-9
60H (96): Tutti OFF
61H (97): Tutti ON
:0H–EH (1–15)
:00H–7FH (0–127)
:0H–EH (1–15)
:00H (0) off
(received as 00H-39H)
:7FH (127) on
(received as 40H-7FH)
:0H-EH (1–15)
:0H–EH (1–15)
:0H–EH (1–15)
:0H–EH (1–15)
:FH (16)
62H(98)(3,4-manual models): Man.II Plenum OFF
63H(99)(3,4-manual models): Man.II Plenum ON
62H(98)(2-manual models): Man.I Plenum OFF
63H(99)(2-manual models): Man.I Plenum ON
64H(100)(3,4-manual models):Man.III Plenum OFF
65H(101)(3,4-manual models):Man.III Plenum ON
64H(100)(2-manual models): Man.II Plenum OFF
65H(101)(2-manual models): Man.II Plenum ON
66H(102)(3,4-manual models): Man.I Plenum OFF
67H(103)(3,4-manual models): Man.I Plenum ON
68H(104): Man.IV Plenum OFF
69H(105): Man.IV Plenum ON
6AH(106): Plenum OFF
6BH(107): Plenum ON
6CH(108): Reed OFF
6DH(109): Reed ON
6FH(111): Crescendo — (OFF)
70H–7FH (112-127): Crescendo steps 1-16
STANDARD SYSTEM EXCLUSIVE MESSAGES
•
Device Inquiry
Instrument information sent after switching on and
when a Device Inquiry Request is received.
Data format: F0H 7EH 00H 06H 02H 31H ffH ffH
mmH mmH xxH yyH zzH vvH F7H
F0H: Exclusive status
7EH: Universal Non Realtime message
00H: channel
06H: general information
02H: device ID reply
31H: Viscount ID
ffH ffH: device family code
mmH mmH: device family member code
xxH yyH zzH vvH: software version
F7H: End of Exclusive
•
Master Fine Tuning
Parameter: Tuning
Video page: Tuning
Data format: F0H 7FH 7FH 04H 03H vvH nnH F7H
F0H: Exclusive status
7FH: Universal Realtime message
7FH: channel (any)
04H: Sub-ID #1=Device Control message
03H: Sub-ID #2=Master Fine tuning
vvH nnH: fine tuning value
00H 00H: A4=415,30 Hz
00H 40H: A4=440 Hz
7FH 7FH: A4=466,16 Hz
F7H: End of Exclusive
-
This message is transmitted only.
•
Temperament
Parameter: Temperament
Video page: Tuning
Data format: F0H 7EH 7FH 08H 08H 03H 7FH 7FH
[ss] ... F7H
F0H: Exclusive status
7EH: Universal Non Realtime message
7FH: channel (any)
08H: Sub-ID #1=MIDI Tuning standard
FR - 59
Annexe
Manuel de Reference
Publicité
