Télécharger Imprimer la page

Outsunny HY6302 Manuel D'assemblage Et D'instructions page 6

Publicité

Les langues disponibles

Les langues disponibles

Warning
Do not attempt to modify the power tool in any way. The use of any attachment or
accessory over than those recommended in this instruction manual could result in
damaged to the power tool and injury to he operator.
Have your power tool repaired by a qualified person.
This electric power tool complies with national and international standards and
safety requirements. Repairs should only be carried out by qualified persons and
using original spare parts. Failure to do so may result in considerable danger to the
user.
Protect Furnishings
If using the power tool inside your house, please protect furnishings and floors with
a suitable dust sheet.
Fire Precautions
When using the certain power tools inside your house or workshop general fire
precautions should be observed. As a precaution it is recommended that an expert
is consulted on obtaining and using a suitable fire extinguisher.
SPECIFIC SAFETY INSTRUCTIONS
VAC-BLOWER
WARNING
Never allow children or people who have not read and understood these
instructions to use the Vac-Blower. Do not use the Vac-Blower for any purpose
other then those described in these instructions.
Study the warning sticks on the machine, and replace any damaged or illegible
warning sticks.
Read these instructions carefully. Find out what the controls do and learn how to
use the machine correctly and safely.
The user is responsible for any accidents that happen to other people or their
property.
Preparation
Always wear suitable clothing, gloves and stout shoes. The use of approved safety
goggles is recommended.
Before using your Vac-Blower always visually inspect it to see that any parts are not
worn or damaged. Replace worn or damaged parts. Always inspect the insulation
on the power cord and any extension cable to be used, for cuts, and abrasions and
the condition of connectors. Any cable that is cut or worn and any damaged
connectors should be replaced before using the Vac-Blower.
Always check that there is no material left in the Vac-Blower before starting. This
could be dangerous.
Always check the operation of the Residual Current Device (R.C.D.).
Only use replacement parts, recommended for this product.
Take care when carrying out any repair or adjustment.
A Vac-Blower that has been modified or is incomplete is dangerous and no attempt
should me made to operate it.
EN

Publicité

loading

Ce manuel est également adapté pour:

845-488v90