Outsunny HY6302 Manuel D'assemblage Et D'instructions page 10

Fitting the debris collection bag (Pic.5)
Before fitting the debris collection bag ensure that the Vacuum/Blow selector lever
operates smoothly and that it is not obstructed by debris from the previous use.
Locate the debris collection bag and fold back the opening with the adaptor connection
inserted into the holes on both sides of discharge opening(Pic.5) (5.1/5.2/5.3/5.4). Attach
the front of the debris collection bag to the underside of the suction-blower tube using the
clip fitted to the debris collection bag.
Fitting the shoulder harness (Pic.6)
The Vacuum-Blower is provided with a shoulder harness (Pic.6)(6.1) this is attached to the
top of the main body of the Vacuum-Blower as shown (Pic.6)(6.2). The shoulder harness is
provided to reduce fatigue and aid comfort when using the Vacuum-Blower and can be worn
in a position to suit the operator.
EN