Outsunny HY6302 Manuel D'assemblage Et D'instructions page 11

Before Starting.
Before starting the Vacuum-Blower plug into the mains supply via the (R.C.D.) and switch
on. Check that the (R.C.D.) is operating correctly.
Starting the Vacuum-Blower. (Pic.7)
To start the Vacuum-Blower Ensure that the intermediate suction/blower tube is fitted
correctly.
Warning! Before selecting either the Vacuum or Blow function ensure that the selector
lever operates smoothly and that it is not obstructed by debris from the previous use.
Select either the Vacuum or Blow function using the selector lever
on the side of the machine (Pic.7)(7.1) and slide the On/Off switch to position
(I)(Pic.8)(8.1).
Stopping the Vacuum-Blower.
To stop the Vacuum-Blower simply unclamp the On / Off switch(Pic.8)(8.1).
Using the Vacuum-Blower.
Do not attempt to pick up wet debris, allow fallen leaves etc, to dry out before using the
Vacuum Blower. The Vacuum-Blower can be used to blow debris from patios, paths,
driveways, lawns, bushes and borders. It will also pick up leaves, paper, small twigs and
wood chippings. When the using the Vacuum Blower in Vacuum mode the debris is sucked
up the suction tube before being ejected into the debris collection bag, as the debris
passes through the suction fan it is partially shredded. The shredded organic debris is ideal
to use as mulch around plants. Warning! Any hard objects, such as stones, tin cans glass
etc, will damage the suction fan.
EN