cecotec CONGA 1990 CONNECTED Manuel D'instructions page 47

Les langues disponibles

Scrubbing intensity levels function

Press the scrubbing levels button on the remote control or on the App to adjust the water level

during the scrubbing process. There are 3 water levels: High, Medium or Low.

Magnetic Strip

Use the magnetic strip included with Conga 1990 Connected to delimit the cleaning area so the

robot is not able to access to certain areas.

Cleaning scheduling

This robot includes schedule settings in order for you to customize the cleaning cycles. The

robot can only be scheduled through the remote control or through the App.

Note: Make sure the remote control is close to the robot when setting the clock or

scheduling cleaning cycles.

Setting the remote control's time

Press the clock button on the remote control. Digits will start blinking.

Select the current day of the week by pressing the upwards and downwards buttons. Fig.

Use the left and right buttons to set minutes and hour. Use upwards and downwards

buttons to change the digit while it blinks. Fig. 35

Finally, press the power or the clock button. The robot will beep when the time settings

have been confirmed. Fig. 36

Setting cleaning schedule

For a better and more comfortable cleaning, the robot includes a schedule function to set

daily schedules through the remote control or the App in those Conga models that include

app. In accordance to the configuration, the robot will automatically start cleaning the

selected days at the desired time.

The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.

Before setting the time and the robot configuration, make sure the robot's power switch is

on and that the power button on the robot is lit up.

Configuration with the remote control

Press the schedule button on the remote control. Digits will start blinking. Fig. 37

Use direction buttons to select the day. Once selected, use right and left buttons to select

minutes and hours. Use direction buttons when digits are blinking to configure the desired

minutes and hours. Press the power button to save settings. Enter the desired days and

follow the same steps to schedule them. Fig. 38

Finally, press schedule button to exit scheduling mode. The robot will beep once indicating

the scheduled cleaning settings have been confirmed.

The user may schedule as many days per week as desired. The home screen will display

when the robot is scheduled.

ENGLISH