METRICA BRAVO LASER ROTATIVO H Mode D'emploi page 9

Inclination of the X axis
Align the X1 beam with the direction of the tilt required for
adjustment, as shown below:
Y2
X2 X1
Y1
Press the buttons or
down.
Inclination of the Y-axis
Align the Y1 beam with the direction of the tilt required for
adjustment.
Press the keys or buttons to move the laser beam up
or down.
Notes: Press the Manual/Automatic button again when the
mode indicator goes off, the instrument switches to the au-
tomatic levelling mode.
All manuals and user guides at all-guides.com
to move the laser beam up or
REMOTE CONTROL
The remote control of the device transmits via
infrared technology.
Point the opening of the infrared beam at the la-
ser device (as shown below) to use the remote
control (distance: inside: 30 m; outside: 20 m).
The keyboard has 9 keys; the display on the unit
flashes to indicate that the operating signal has
been sent after pressing any key.
Remote control functions:
1. Rotation: Operating method referring to SPINNING
2. Scanner: Operating method referring to Directional scan-
ning
3. Inclination adjustment: Operating method referring to SLOPE
ADJUSTMENT
ACCURACY CHECK
Place the device 50 m away from a wall, then align the device in
direction X1 (see drawing):
Remote control
9