Publicité
Les langues disponibles
Les langues disponibles
OPERATING MANUAL
MAIN BODY
LASER MODULE
KEYBOARDS
SCANNER
LED
ON/OFF
All manuals and user guides at all-guides.com
WINDOWS OF BEAM
HANDLE
INFRARED RECEIVER
VELOCITIES
TILT LED
TILT FUNCTION
MANUAL / AUTOMATIC
KEYBOARD FUNCTIONS
1. ON/OFF: Control of the power state.
2. Power indicator: When it is lit, the unit starts.
3. Mode indicator: When it is lit, the instrument levels manually. If
it flashes, it remains in alarm standby mode (the instrument's
inclination is outside the levelling range).
4. Tilt function: warns the user of a misalignment of the instrument.
5. Tilt function LED: if the LED flashes slowly, it is in tilt mode.
When the LED flashes rapidly, the instrument stops leveling.
6. Speeds: there are 5 to choose from: 0-60-120-300-600-0 rpm.
7. Scanner: the scanning angle is 5 steps: 0-10°-45°-90°-180°.
Note: You can use the remote control to access additional
functions.
OPERATION
Inserting the battery
1. 4×C size Ni-MH batteries can be used in the unit.
2. Remove the cover of the battery compartment on the bottom
of the unit.
3. Insert the batteries into the housing according to the right
electrode.
4. Place the cover on the battery compartment and tighten all
screws.
Positioning the unit
Place the unit on a tripod or stable flat surface or even hang it on
7
Publicité
