Stanley iPAC Guide D'installation page 9

Test Action
Present a key to each
reader - the lock will
activate.
Press the Request to
Reader and
Exit switch - the lock will
Request to Exit
activate.
Test
Open the door contact.
Present a key to a reader, press the
Request to Exit switch and open the
door contact simultaneously.
Auxiliary and
Remove link to 0V on tamper or open
Lock Relays
circuit tamper switch.
Test
Remove link to 0V on emergency
override or leave open circuit tamper
switch.
All manuals and user guides at all-guides.com
Controller
The door green LED flashes
once for SIGA, twice for
SIGB.
The door green LED flashes
three times and the yellow
LED is lit.
The door green LED flashes
four times and the red LED
is lit.
The appropriate auxiliary relay is activated.
Both auxiliary relays are activated.
The auxiliary relay is activated.
Observation
Reader
The reader LED
flashes once for
SIGA, twice for SIGB.
The reader LED
flashes three times.
The reader LED
flashes four times.