Stanley iPAC Guide D'installation page 8

Test Action
Normal
Operation
Hold down the One-Touch™
button for less than 2
seconds. Present keys and
press RTE switches and
observe LEDs. Automatically
One-Touch™
exits after 2 minutes.
View Mode
Hold down the One-Touch™
button for 2 to 4 seconds.
One-Touch™
Active Mode
All manuals and user guides at all-guides.com
The green system status LED
flashes at normal rate.
Door status LEDs off.
The green system status LED
flashes at normal rate.
Green on - valid key has been
presented to reader.
Green flash - invalid key has
been presented to reader.
Red on - door open.
Yellow on - RTE switch has been
pressed.
The green system status LED
flashes faster than normal.
Observation
Controller Reader
The normal operation
of the reader.
The normal operation
of the reader LED
changes, e.g. if
default is red, it turns
green.