Stanley iPAC Guide D'installation page 10

Test
Remove the link between TAMP and 0V on
the Tamper & Override terminal block.
Tamper and
Override Test
Remove the link between OVRD and 0V on
the Tamper & Override terminal block.
Link Tx and Rx on the RS-232 terminal block.
RS-232 Test -
PAC 512 only
Hold down the One-Touch™ button for less
than 2 seconds. One-Touch™ Test mode will
Leave One
automatically time out after 1 hour and on
-Touch™ Active
power down and up.
Test mode
All manuals and user guides at all-guides.com
Action
Observation
Controller
The auxiliary relay is activated but the door relays are
unaffected.
Both auxiliary and lock relays are activated, the door opens
and the lock operates.
The red and
green RS-232
LEDs are lit.
The green
system status
LED returns to its
normal flash rate
Reader
There is no effect
at the reader.
The reader LED
returns to its
normal operation.