FUXTEC BV240 ECO Manuel D'instructions page 47

Original manual FX-BV240ECO_de_en_fr_ita_es_rev01
Remove the roller.
1. Remove the four screws. (Fig.11B)
2. Lift the roller and pull it out in the direction of the arrows. (Fig.11C)
Fig.11A Fig.11B
Attach the roller.
1. Push the new roller in the direction of the arrows, insert the shaft into the hexagon socket and
press the other side into the holder.
2. Fasten the roller again with the two screws.
3. Check if the roller is seated correctly.
4. Fix the scarifier roller.
48