FUXTEC BV240 ECO Manuel D'instructions page 46

Fig.9A Fig.9B
22. REPLACING THE ROLLER
CAUTION: Make sure to wear work gloves.
Caution: Only use original scarifier shafts approved by the manufacturer.
Only replace the roller with an original roller as this ensures optimum performance and safety under
all conditions.
To change the scarifier roller , proceed as follows
1. Switch off the engine and let it cool down.
2. Remove the spark plug connector.
3. Remove the grass collector.
Lift the device slightly at the front.
Note: Do not lift the machine too high. Otherwise, fuel may leak from the tank. Drain fuel if
necessary before changing the roller.
Original manual FX-BV240ECO_de_en_fr_ita_es_rev01
47