Tripp-Lite DWMLARM1732AM Manuel Du Propriétaire page 6

Installation
5
Mounting on Solid Walls
Note: This product is designed to be installed
on solid concrete or masonry walls.
WARNING
• Installers are responsible to provide hardware for other types of
mounting situations.
• Installers must verify that the supporting surface will safely support
the combined load of the equipment and all attached hardware
and components.
G
W-B W-C
6
95 mm 95 mm 95 mm
(3.7") (3.7") (3.7")
Ø 12 mm
(Ø 1/2")
W-A H
2
1
Use the template Drill pilot holes.
and a pencil to find
and mark the exact
location of the
mounting holes.
Screw the wall
mount onto
the wall.