1600A014NP 08-18 GWS10-45DE.qxp_GWS 8/24/18 8:50 AM Page 19
Cleaning
tool and/or charger from the power supply
before cleaning. The tool may be cleaned
most effectively with com pressed dry air.
Always wear safety goggles when
cleaning tools with compressed air. When
using compressed air to clean tools, make
sure that the air pressure is not greater than
30psi.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed
objects through opening.
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
higher the cord capacity.
* Type 27 wheel guard
* Lock nut
* Grinding wheel
* Backing flange
* Side handle
NOTE: Not recommended for use with type 11 cup wheels.
To avoid accidents,
always disconnect the
Extension Cords
If an extension cord is
necessary, a cord with
Accessories
The use of accessories not specified for use with the tool described in this
manual may create a hazard.
Certain cleaning agents
and solvents damage
plastic parts. Some of these are: gasoline,
car bon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Accessory storage & maintenance
Store accessories in a cool dry place and
avoid freezing. Before use check accessory for
cracks and fractures, do not use if damage is
suspected.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25
50
18
16
18
16
3-6
18
16
6-8
16
16
8-10
14
12
10-12
12-16
* Lock nut wrench
** Type 41/1A wheel guard
** Hand shield
(*= standard equipment)
(**= optional accessories)
-19-
Wire Sizes in mm
Cord Length in Meters
15
30
60
120
100
150
16
14
0.75
0.75
1.5
14
12
0.75
1.0
2.5
14
12
0.75
1.0
2.5
14
12
1.0
2.5
4.0
–
–
–
–
–
2
2.5
4.0
4.0
–
–