Performance Specifications – See Fig.2.
Pump
Liquid temperature
Priming
Flow rates
Air supply pressure
Noise level
Allowed fluids for Santoprene®
materials
Potable Water, Mild Acids, Alkaline, Soaps,
Alcohols, Ketones, Brake Fluid
Not Allowed fluids for Santoprene®
materials
Oils, Solvents, Soaps with Solvents, D-Limo-
nene, Aromatic Hydrocarbons
2
Max.
100
(6.9 )
80
(5.5 )
60
(4.1 )
40
(2.8 )
Min.
20
(1.4 )
0
1. 0
(3.8 )
Only used with specified products. DO NOT PUMP GASOLINE OR OTHER FLAMMABLE LIQUIDS WITH A FLASH POINT BELOW 100°F
Min
Max
Dry
Wet
Max
Max
Allowed fluids for Viton® materials
Acids, Oils, Solvents, D-Limonene, Aromatic
& Halogenated Hydrocarbons, Power
Steering & Transmission Fluids
Not Allowed fluids for Viton® materials
Ketones, Acetones, Automotive Brake Fluid,
Ammonia, Ethanol, EGME Solvent
100*
80*
60*
40*
20*
2. 0
3. 0
4. 0
5. 0
(7.6 )
(11.4)
(15.1)
(18.9)
Flow in GPM (l/min)
*Indicates Air Inlet Pressure
EXPLOSION HAZARD
(37.8°C) OR USE WHERE FLAMMABLE VAPORS ARE PRESENT.
6. 0
(22.7)
WARNING
3
Up to 5 GPM (18.9 L/min)
20 to 100 PSI (1.4 to 6.9 bar)
Allowed fluids for Kalrez® materials
Lubricating Oils, Hydraulic Oils, Vegetable
Oils, Alcohols, Keytones, Aromatic Hydro-
carbons, Aliphatic Hydrocarbons, Diluted
Acids, Alkalis, Soaps with solvents, Automo-
tive brake fluid, Acetones, Ethanol, Inks
Not Allowed fluids for Kalrez® materials
Halogenated Solvents
Pump Symbols
Product In
40°F (4.4°C)
120°F (48.9°C)
15 ft. (4.5 m)
20 ft. (6.1 m)
87dB
Product Out