Publicité
NEXSYS Series Rackmount PDU User Manual
F. Convenience Outlet
Additional surge protected outlet on front of unit.
G. Input Circuit Breaker
Located next to the AC input, the input circuit breaker trips when the load exceeds the PDU
power rating.
H. AC Input
IEC14 (for 15A) or IEC20 (for 20A) inlet based on the model purchased.
J. AC Input Retainer Clip
Use clip to secure the power cord into the IEC Inlet.
K. Indicator Light
Green LED indicates power to the outlets.
L. Status (Output)
For MOV Models: When contact is open, indicates the surge status is protected. When
l
contact is closed, indicates the surge is compromised and no longer protected.
For Series Protection Models: When contact is open, indicates the unit is powered Off.
l
When the contact is closed, indicates the unit is powered on.
M. Remote (Input)
When enabled, outlets may be turned On or Off via contact closure.
When contact is closed, the outlets are turned On.
l
When contact is opened, the outlets are turned Off.
l
N. Outlets
All outlets controllable by power button and remote contact.
P. External Grounding and Bonding Stud
For connecting an external ground wire to bond the chassis.
NOTE
Terminal Block plug pre-installed on PDU.
NOTE
Terminal Block plug with jumper pre-installed on PDU.
©2023 |
Legrand AV,
17
Inc. All rights reserved.
Feature Set
Publicité
