Publicité
NEXSYS Series Rackmount PDU User Manual
Introduction
This User Manual provides information about the installation, setup, and configuration of your
NEXSYS Series Rackmount PDU product.
Mounting Your NEXSYS Series Rackmount PDU
1. Use a #2 Phillips screwdriver and (4x) rack screws (not provided) through holes on the pre-
installed ears and into the threaded holes on the rackrail to mount your NEXSYS Rackmount
PDU as shown.
NOTE
The NEXSYS Rackmount PDU unit is 1 RU.
©2023 |
Legrand AV,
14
Inc. All rights reserved.
Introduction
Publicité
