Tokai LAR-354B Manuel D'utilisation page 28

2) During MP3 file in disc, or USB/SD mode:
In SD, USB or MP3/WMA disc playback mode, press APS button, it is activated as cyclical selecting song
mode as follows:
-> TRACK SERIAL NUMBER SEARCH
-> FIRST CHARACTER SEARCH
-> DIRECTORY SEARCH
A) In TRACK SERIAL NUMBER SEARCH mode, the LCD will display 001--- and flash the biggest digit 0 that
the SD card, USB or MP3/WMA disc contains. Rotate the VOL knob to select the number of the flashing digit
from 0 ~ 9. Then press SEL button to confirm and flash next smaller digit 0. With the same means, select the
number of the flashing digit. After finishing inputting the number of all flashing digit, press BND button to play
the track of the corresponding number.
B) In FIRST CHARACTER SEARCH mode, the LCD will display A**-- and flash the first character. Rotate
the VOL knob to input character by the order of A~Z and 0~9. Press SEL button to confirm and flash the next
character. With the same means, select the character of the flashing place. After finishing inputting all the 3
characters, press BND button and then matched files will be scrolling on the LCD by rotating the VOL knob.
Finally press the BND button to play the track. If there is not any file matched, NO MATCH will be displayed
and then it will return to the beginning of this track search mode for inputting again.
C) In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is not the root folder, it will
find a root folder named ROOT). Rotate the VOL knob to select your desired folder and press BND button to
play the first track in the selected folder.
20. SD CARD SLOT
To play the files contained in your SD card, press the REL button to release the front control panel from the
unit chassis & insert the SD card into the SD card slot. The system will change into the SD mode automatically,
and then play the first file in the SD.
Note: when MMC/SD card and USB stick are both inserted into their slot or socket, the system will change
into the playback mode of the latter one.
21. RESET BUTTON
Before operating the unit for the first time or after replacing the car battery or after changing the connections;
you must reset the unit. Press this button with a sharp object. This operation will erase the clock setting and
some stored contents.
22. FLASHING LED
When the front control panel is removed this indicator flashes.
23. BLUETOOTH MICROPHONE
24. BALAYAGE
Appuyez sur le bouton SCAN pour balayer la fréquence radio. Si un signal est détecté, la fréquence en cours
sera en attente et clignote pendant 5 secondes, puis appuyez de nouveau sur SCAN pour arr ê ter et rester la
fréquence actuelle, faute de quoi, la radio continuera à balayer à l'autre fréquence radio 5 secondes plus tard.
PDF created with FinePrint pdfFactory Pro trial version
All manuals and user guides at all-guides.com
5. OPERATION OF THE CONTROLS
28
http://www.pdffactory.com