Tokai LAR-354B Manuel D'utilisation page 27

3) Press RPT button once to play the current track repeatedly, and the RPT ONE indicator displays LCD.
During MP3/WMA disc, SD or USB mode, press and hold the RPT button to play the current folder
repeatedly, and the D-RPT will be visible on the LCD display.
In REPEAT mode, press RPT button again to disable the REPEAT function and RPT OFF displays on LCD.
4) Press the RDM button to play all tracks on disc in a random order, and RANDOM indicator displays on
LCD.
In RDM mode, press RDM button again to stop playing in random order and the LCD will display RDM OFF.
Press and hold the RDM button to play the current folder in random order, and the D-RDM will be visible on
the LCD display.
5) Press the 5 or 6 button to move up and down by 10 tracks at a time. When the remained total track is less
than 10, the both buttons are inactive. Press and hold 5 or 6 button to select & play next or the previous
folder.
15. MODE BUTTON
Press MODE button to switch among following modes: TUNER (RADIO), DISC (when a disc is loaded),USB
(when an USB stick is inserted), SD (when a memory card is inserted), and AUX mode.
16. AUXILAIRY INPUT
Press the MODE button to select AUX mode. You can connect an external audio device to this socket.
Turn the VOLUME knob to adjust volume level.
17. USB SOCKET
To play the files contained in your USB stick, remove the plastic cover and insert the USB stick into the USB
compatible port. The unit automatically switches to USB mode and the first file starts playing.
18. BAND/TEL BUTTON
In radio mode, press this button briefly to select the radio broadcasting band you would like to hear.
The AM/FM band is toggled cyclically through the tuning bands
In CD disc, SD or USB playback mode, press this button to display the time slider of current track played.
19. APS/HANG UP BUTTON
1) In RADIO mode:
Press this button briefly to display for 5 seconds the preset station on LCD.
Press and hold this button to enter in APS mode, the radio searches from the current frequency and checks
the signal strength level until 6 stations are found.
And then the 6 stations frequencies are preset to the corresponding preset memory numbered bank.
The auto-storage operation is implemented in the each selected band. When the auto-storage operation is
finished, the radio executes the Preset Scan.
PDF created with FinePrint pdfFactory Pro trial version
All manuals and user guides at all-guides.com
5. OPERATION OF THE CONTROLS
: -> FM 1-> FM 2 -> FM 3 -> AM 1-> AM 2.
27
http://www.pdffactory.com