Kaba c-lever Notice Succincte page 13

All manuals and user guides at all-guides.com
Installation
11
Kaba c-lever
1
3
15
k2evo704xy-2013-09
Push the coupling unit (3) with upper part
ahead into the outer shield (1). Afterwards
push the lower part of the coupling unit
(3) with the aid of a screwdriver into the
outer shield as well. The coupling unit
must be placed firmly and level in the
outer shield! Fix the coupling unit with the
fixing screw (11).
NOTE: Do not bend the tabs in the
outer shield!
Insert the locking cylinder (16) into the
mortise lock and fix it loosely with the
cylinder fixing screw (do not tighten).
Feed the antenna cable (15) through the
upper furniture fixing hole and put the
outside shield (1) onto the door. After
putting on the outside shield (1) it is
mandatory to pull the spindle (5) in the
direction of the arrow, to relieve pres-
sure from the coupling unit (3).
NOTE: Take care of the antenna
cord (15)!
Quick Guide
13
EN